С английским помогите тестовый по тексту
. Найдите соответствующие ответы на вопросы и напишите их в той последовательности, в которой заданы вопросы:
Вопросы
1. What operations are the engine lathe used for?
2. What are the principal units of the lathe?
3. What units are located on the bed?
4. What is the function of the tailstock?
5. Where are the handles and levers mounted?
Ответы
a. To support one end of the work turned between centers.
b. On the front of the apron.
с. For turning, drilling, screw cutting and others.
d. The headstock, the saddle and the tailstock.
e. The bed, the headstock, the tai1stock and the carriage with the apron.
Приложения:
![](https://st.uroker.com/files/102/1025657d66245148ea22fcf161e8a7e7.jpg)
![](https://st.uroker.com/files/cb4/cb41ff7f1150f0a4cebeda253528e23f.jpg)
Ответы
Ответ дал:
0
Закончите предложения, выбрав соответствующий вариант окончания:
1. The unit that contains the spindle and the gearbox is called....
a) the carriage b) the headstock c) the tailstock
2. The unit that supports one end of the work turned between centers is called ...
a) the carriage b) the headstock c) the spindle
3. The unit which carries the tool is called....
a) the carriage b) the headstock c) the tailstock
4. The units, by which the actions of the tool are controlled, are called....
a) guide ways b) the saddle and the apron c) levers and handles
1. The unit that contains the spindle and the gearbox is called....
a) the carriage b) the headstock c) the tailstock
2. The unit that supports one end of the work turned between centers is called ...
a) the carriage b) the headstock c) the spindle
3. The unit which carries the tool is called....
a) the carriage b) the headstock c) the tailstock
4. The units, by which the actions of the tool are controlled, are called....
a) guide ways b) the saddle and the apron c) levers and handles
Вас заинтересует
5 месяцев назад
5 месяцев назад
1 год назад
5 лет назад
5 лет назад
7 лет назад